Touch screen not work after screen replacement

Discussion in 'iPhone 6S' started by Omigra298, Jun 14, 2016.

  1. Omigra298

    Omigra298 New Member

    Joined:
    Jun 14, 2016
    Likes Received:
    0
    After screen replacement my touchscreen isn't working any more! Anyone any tips or tricks on that one? Screen is working fine!
     
  2. Rafagon

    Rafagon Genius
    Gold

    Joined:
    Dec 7, 2011
    Likes Received:
    1,236
    Whoever replaced it--did they give you a warranty? If so, take it back and sternly demand they do right by you.

    If this was a DIY job, then disregard my post.
     
  3. liberated

    liberated Genius
    Gold

    Joined:
    Jul 19, 2007
    Likes Received:
    467
    It's likely a loose connection on one of the ribbon cables. Open and reconnect or take it back to whom repaired it
     
  4. louris990

    louris990 New Member

    Joined:
    Oct 28, 2016
    Likes Received:
    0
    There are 3 Possible Reasons:

    1. The touch screen could be faulty. Screen replacements are manufactured by third party companies and sometimes their integrity could not be meeting the standards.

    2. The flex cable is not rightly in contact with the connector. This implies that the signals from the screen won’t be conveyed to the phone.

    3. The same flex cable could have been damaged during the reassembly process. This gives people a lot of headache since the torn part could not be visible sometimes.

    For detailed solutions you can search hcqs blog on google.
     

Share This Page